1.4mm diameter x 0.30mm thread pitch metric tap
Light-duty carbon steel miniature tap for repairing damaged threads in small parts
Plug taps have a 3-5 thread lead for easy starting and alignment
1.5mm round shank
1/4” length of thread
1” overall length
Use a #56 drill as the tap drill for new holes. You may need to use a slightly smaller or slightly larger drill depending on the depth of your hole.
Price shown is for one pack of three 1.4mm metric taps
MADE IN FRANCE
HINT: Tapping with miniature taps is very tricky. You may have to experiment with the tap drill size. A lot depends on how deep you are tapping, the sharpness of your drill, and how rigid or accurate your set-up is. The difference between the root and the crest of the thread is very small. A little drill run-out and you wind up with an over-sized hole and no threads. A dull drill or center drill may work-harden the part, making the drilling and tapping process more difficult. Use of a little oil, tapping fluid or liquid soap is recommended.